CONTACT US
Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd.
Add : 366 Tongbaishan Street, Economic and Technological Development Zone, Urumqi
Phone : 86-:13809951165
Service Phone :0991-4653766
Phone:0991-4658766
Fax:0991-4611577

News

What are the uses of the distribution box

distribution box Easy to manage, circuit failure is conducive to maintenance. A group of equipment for centralized installation of switches, instruments, etc., including distribution boards and distribution boards.
The composition of the distribution box is generally divided into two parts
First, the parts set, that is, the distribution box shell and related accessories.
Second, electrical components and related accessories, namely air switch and required accessories.
Installation requirements of distribution box
1. It can be installed in production places and offices with low risk of electric shock and open distribution board.
2. The processing workshop, casting, forging, heat treatment, boiler room and woodworking room with high risk of electric shock or bad working environment shall be provided with closed cabinet.
3. In hazardous workplaces with conductive dust or flammable and explosive gases, sealed or explosion-proof electrical facilities must be installed.
4. The electrical components, instruments, switches and lines of the distribution box are arranged in order, firmly installed and easy to operate.
5. The bottom of the board (box) installed on the floor must be 5-10 mm higher than the ground.
6. The center height of the control handle is usually 1.2 ~ 1.5 m; there is no obstacle in the range of 0.8 ~ 1.2 m in front of the box. The protection wire connection is reliable.
7. No electrified body shall be exposed outside the box.
8. The electrical components to be installed on the outer surface of the box or on the distribution board must have reliable screens.


Previous:Low Voltage switchgear power distribution box
Next:Principle of box type substation