CONTACT US
Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd.
Add : 366 Tongbaishan Street, Economic and Technological Development Zone, Urumqi
Phone : 86-:13809951165
Service Phone :0991-4653766
Phone:0991-4658766
Fax:0991-4611577

BCK Air insulated enclosed busway





■Product introduction
BCK series air-insulated enclosed busway can be AC three-phase three-wire, three-phase four-wire, three-wire five-wire frequency is 50Hz (or 60Hz), rated working voltage is 660V, rated working current is 100-5000A, product has small volume, conveying The current is large, safe and reliable, and the flexible installation and distribution construction does not interfere with each other, and the design is reasonable and the specifications are complete. It is the most ideal power supply and distribution equipment for modern large and medium-sized enterprises to introduce engineering experimental bases for high-rise buildings. Busway with socket. The power supply shunt can be easily extracted through the plug-in switch box. The installation of the busway can be directly connected from the transformer to the power distribution cabinet, or directly from the low voltage cabinet to the power distribution system as a power distribution trunk.
Model meaning

technical parameter
Rated insulation voltage Rated frequency: 50/60Hz
Rated current: see the following table:

Insulation resistance value: The insulation resistance of each busbar slot unit should be greater than or equal to 20MQ. The user should first check the insulation resistance value before installation.Insulation strength: General busway units are subjected to 50Hz, 3750/min power frequency withstand voltage test before leaving the factory. Short-circuit strength: The busway can withstand the pad stress and electric power generated by the rated current withstand current at the rated short-circuit specified in the following table. There is no permanent observable deformation after being subjected.

Dimensions and weight