Urumqi Nantianya Electrical Complete-sets Equipment Co.,Ltd.
Add : 366 Tongbaishan Street, Economic and Technological Development Zone, Urumqi
Phone : 86-:13809951165
Service Phone :0991-4653766

PS Rittal cabinet

The internal frame of the PS series Rittal cabinet is made of high-quality cold-rolled steel plate - the sub-machined nine-fold curved column, which is formed by steel insert and welded double connection. The overhead ring is directly connected with the steel insert to ensure the lifting strength of the frame. Dynamic load bearing 600kg. The four-sided siding can be disassembled to facilitate the installation of internal electrical equipment and the connection of multiple single cabinets. The frame column has a mounting hole every 25mm - a DIN-mounted mounting hole makes the installation and fixing of internal electrical components more convenient and efficient. Doors of modular heights of various heights (200-100mm) can be installed on the front side of the cabinet, further expanding the scope of use of the PS cabinet. The intuitive operator panel, modular internal structure, and easy-to-maintain segmented movable door structure make it a classic switchboard system control cabinet. The bottom plate is a plurality of movable cover plates, which ensures convenient and flexible routing, and the base can be selected as a fixed or assembled base. The perfect structural design makes the field installation and operation performance suitable for different control industries. The unique piano operating table determines the efficiency of the machine and the factory, providing the perfect working environment between the highly sensitive controller and the operator. Ensuring the most economical operation of modern plants, widely used in power plant control, transportation, laboratory technology research and development and various tool manufacturing lines
Protection level: IP54
Standard TCPS mechanical configuration:
1 set of frame
1 cover
1 front door
1 piece of back plate
1 mounting plate
2 side panels
Single row of side mold beams 2 pieces
convenient pack
Frame: 1.5mm thick nine-fold curved profile
Front door: 2.0mm cold rolled steel plate
Back plate: 1.5mm thick cold rolled steel plate
Mounting plate: 3.0mm thick cold rolled steel plate
Side beam: 1.5mm thick cold rolled steel plate
Frame: RAL7044
Mounting plate: orange or galvanized
Cabinet: RAL7032 or RAL7035
Base: RAL7022
■Structural characteristics
Frame body: Nine-fold curved profile frame body, the column is punched with 25mm interval module holes to facilitate the installation and maintenance of electrical components.
Top cover: detachable, with a sealing strip inside, which facilitates the formation of the top of the cabinet and the frame.
Ring: It is convenient for on-site dynamic lifting, with waterproof rubber pad inside, which can bear 600kg.
Mounting plate fixings: used for fixing the mounting plate. It is installed with the inner hexagonal screws of M8, and the front and rear positions can be adjusted.
Door lock: three points of upper, middle and lower locks, and a tighter locking door.
Door ribs: Strengthen the strength of the door, and the door ribs have a modulus L, which is used in conjunction with the electrical appliances to facilitate the on-site routing.
Sealing strip: Polyurethane foam sealing strip, dustproof, waterproof, increase the degree of protection.
Front door: The front door is 25mm high according to the ground, and the movable door] panel can be opened 130 degrees.
Base: The base is welded or assembled to facilitate the on-site lead and cable storage.
Bottom ring frame: mounted on the bottom of the frame and mounted on the frame together with the base.
Side panel: The side panel is self-tapping and is detachable with a sealing strip inside.
Mounting plate: used to install electrical components, the front and rear positions of the mounting plate can be modularized.
Bottom cover: It is mounted on the bottom of the cabinet and is detachable for easy wiring.